金坛市程序还真是洪冠电器有限公司

GAD605固态照明灯  GAD605-J固态应急照明灯

 

固态应急照明灯产品简介目录：

 

【固态应急照明灯】适用范围-----------------------------------------------------------1；

【固态应急照明灯】产品特性-----------------------------------------------------------2；

【固态应急照明灯】的使用说明--------------------------------------------------------3；

【固态应急照明灯】注意事项-----------------------------------------------------------4；

【固态应急照明灯】结构特性-----------------------------------------------------------5；

【固态应急照明灯】技术参数-----------------------------------------------------------6；

外形尺寸及配光曲线-----------------------------------------------------------------------7；

品质保证--------------------------------------------------------------------------------------8；

 

以下是产品简介内容----------------------------------

 

【固态应急照明灯】适用范围:

● 适用于电力、冶金、船舶、交通设施等行业的工作环境。
● 适用于仓库、船舶、火车、飞机及其它大型设施的客舱、 货位、走道、地道作室内照明。

 

【固态应急照明灯】产品特性

透明件采用进口PC灯罩，透光率高，抗强力冲击，控制装置外壳采用优质钢板折弯成形。

采用固态高效LED光源，环保节能，寿命长达10万小时。

采用科学的散热设计，保证产品长时间正常工作。

灯具可调整照射角度，实现最佳照明。

设有电子调压装置，宽电压工作。

灯具内装高能无记忆锂电池和控制板，当电源断开时可切换到应急状态。

多种控制模式，可实现正常照明和事故照明两用，可选择自动切换或手动切换，也可仅作为事故照明使用。

 

 

【固态应急照明灯结构特性】                                                                   

 

● 采用第四代绿色环保、大功率白光LED固态光源，光效高， 使用寿命长达50000小时，可实现长期免维护。
● 节能低耗，耗电量仅为相同光通量白炽灯的20%。
● 透明件采用美国进口材料，透光率高，抗冲击性能好，抗老化性强，能确保灯具在恶劣的环境下正常工作。
●  外壳采用轻质合金材料，耐磨抗腐，防水防尘，能满足各种环境的仓库、地沟、室内使用的要求。
●  具有良好的电磁兼容性，避免对输电网络造成任何干扰。
●  超薄设计，结构紧凑、体积小、重量轻，简捷轻便。
●  可根据安装场所的环境和使用需要，选择壁挂式、座式、 嵌入式任意一种安装方式。

 

【固态应急照明灯】技术参数                                                                    

 

额定电压	220VAC  50Hz
额定功率	3×1W  5×1W
光源类型	LED
防护等级	IP65
防腐等级	WF2
外形尺寸	180×110×51mm
总重量	0.58Kg

 

【外形尺寸及配光曲线】                                                         

 

 

【固态应急照明灯】的使用说明

● 首次使用时，请先充足电，不使用时，存放三个月内必须补充电一次；

● 当手电筒的照明光线明显变暗时请及时充电，否则会影响电池寿命；

● 产品充电时切勿使用；

● 勿让本品淋雨或受潮

 

【固态应急照明灯】注意事项

● 为保证消防应急照明供电电源的可靠，有条件的应由变电所的低压应急母线段供电。

● 在火灾状态下，靠近地面的烟少、氧气多，人疏散的本能反应是弯腰或匍匐前进，因而局部高照度照明比高位安装带来的均匀照度更为有效。所以应提倡低位安装，即在靠近地面或在地面高度上提供疏散应急照明。

● 使用中的应急灯具应定期进行性能检查，每半个月或一个月通过连续开关试验，以检查电路转换及电池的应急功能，并进行放电，以延长电池使用寿命。

● 保护层厚度不小于30mm；线路采用防火电缆或耐火电缆、电线

 

 

【品质保证】                                                                   

● 本产品严格按照IS09001:2000国际质量管理体系标准进行质量控制，确保产品质量高于国家标准完全达到设计要求，自购买3年内，产品正常使用下出现任何故障(非人为故障)由本公司免费维护。

 

 

 

 

[solid] scope of emergency lighting:

●suitable for electric power, metallurgy, shipbuilding, transportation facilities and other industry working environment.

●suitable for warehouses, ship, train, aircraft and other large facilities, storage, aisle, the cabin for indoor lighting.

[solid] characteristics of emergency lighting products

The transparent parts adopt imported PC lamp, high transmittance, strong impact resistance, control device shell is made of high quality steel plate bending.

The solid state of efficient LED source, environmental protection and energy saving, long service life of 100000 hours.

The thermal design of science, to ensure the normal working long time.

Luminaire with adjustable irradiation angle, to achieve the best lighting.

Equipped with electronic pressure regulator, wide working voltage.

Luminaires with built-in high-energy no memory battery and control board, when the power supply is disconnected switch to emergency state.

A variety of control mode, can realize the normal lighting and emergency lighting dual-purpose, can choose to automatically switch or manual switch, can only use as emergency lighting.

Emergency lighting structure characteristics [solid]

The fourth generation of green environmental protection, high power white LED solid-state light source, high luminous efficiency, long service life of 50000 hours, can achieve long-term maintenance free.

●energy-saving and low consumption, power consumption is only 20% of incandescent lamp with the same luminous flux.

The transparent parts by the United States imported materials, high transmittance, good anti impact performance, strong ageing resistance, to ensure the normal work of the lamp in the harsh environment.

The shell is made of light alloy materials, wear and corrosion resistance, waterproof and dustproof, can meet various environmental warehouse, trench, indoor use requirements.

●has good electromagnetic compatibility, to avoid any interference to the transmission network.

●ultra-thin design, compact structure, small volume, light weight, simple and convenient.

●according to the installation site environment and needs, choose the wall hanging type, seat type, embedded any installation method.

The solid state of emergency lighting [] technical parameters

Rated voltage of 220VAC 50Hz

Rated power of 3 × 1W and 5 × 1W

The light source type LED

Protection class IP65

The anti-corrosion class WF2

Dimensions 180 x 110 x 51mm

The total weight of 0.58Kg

[use] that solid state of emergency lighting

The first use, please fully charged, when not in use, store power must be added within three months time;

When light flashlight was dim please charge immediately, otherwise it will affect the battery life;

Do not use the product charge;

●do not let the rain or wet

[note] state of emergency lighting

●for fire emergency lighting power supply is reliable, has the condition by the low voltage power supply of emergency bus line.

In case of fire, smoke less close to the ground, oxygen, instinctive reaction of evacuation is bend over or crawl, uniform illumination and local high illuminance ratio high installation of more effective. So should advocate low installation, which is near the ground or on the ground to provide a high degree of evacuation and emergency lighting.

Emergency lighting the use should be regularly check the performance, every half a month or a month by continuous switch test, with emergency function test circuit and the battery, and discharge, to prolong the service life of battery.

●protective layer thickness of not less than 30mm; the line adopts the fireproof cables or fire-resistant cable, wire

[quality]

●the products in strict accordance with the IS09001:2000 international quality management system standards for quality control, ensure product quality is higher than the national standard, fully meet the design requirements, since the purchase within 3 years, any fault occurs under normal operation (non-human fault) maintenance free by the company.